LXR-02 V1.6 Changelog

  • fixed: SEQ LEDs not initialized after tmp pattern load/boot
  • fixed: missing feedback for NRPN parameter changes
  • fixed: prog change above 116 crash LXR
  • fixed: MIDI channel handling for CC messages (use voice channel as well)
  • fixed: loading and saving of invalid tmp pattern (pat 65 bug)
  • fixed: fixed small bug in snare drum transient being limited to noise channel when using OSC mix.

 How to update your LXR-02:

  • Copy the latest LXR_V2_xxx.img to the root of the SD card.
  • Push and hold the encoder button while turning on the device.
  • “LXR Bootloader” will pop up in the display.
  • The LXR will check if the firmware image is valid and has the proper checksum.
  • If the check is passed, the update will be installed.
  • Do not turn off the power during installation!
  • Once done, the LXR will prompt you to reboot and the new firmware will be running.


DOWNLOAD 1.6 FIRMWARE HERE

NB! Its always a good thing to back up your SD card contents before running the update in case the projects get scrambled during or after the update.

Have fun!