Premium drum microphone set for studio and stage.
The BEATKIT PRO is a premium 7-piece drum microphone set that offers everything you need for professional setups and sound quality in the studio or on stage. It comes in a super-sturdy mil-spec transport case with room for all included microphones, mounts, clamps, and windshields. Never was there a more complete pro package.
- Professional 7-piece drum microphone set
- For powerful stage sound and studio recordings
- Includes microphone mounts, clamps, and windscreens
- Sturdy mil-spec transport case for safe transport and storage
Includes:
- 1x DTP 640 REX - Kick drum microphone with two phase-aligned capsules, dynamic and condenser
- 1x MTP 440 DM - Snare microphone with incredibly lively and punchy snare sound
- 3x DTP 340 TT - Tom microphones with supercardioid pattern for clean and accurate drum sound
- 2x LCT 140 AIR - Overhead stereo set with two sound characteristics and excellent transient response
MTP 440 DM
Punchy sound for your snare.
The MTP 440 DM is a dynamic snare microphone perfect for getting a punchy snare sound. It earned high praise by being the favorite snare mic of the extraordinary session and live drummer Kenny Aronoff (Paul McCartney, Lady Gaga, Pharell Williams, etc.)
DTP 340 TT
Perfect for toms and percussion.
The DTP 340 TT is a dynamic microphone designed to accurately capture the sound of drums and percussion instruments. Its supercardioid polar pattern ensures maximum isolation of your instrument for studio and live applications.
LCT 140 AIR stereo pair
Overheads with high flexibility in perfect stereo.
The LCT 140 AIR stereo pair lets you switch between two sound characteristics - AIR for a record-ready sound and FLAT for highly authentic recordings. This is the only stereo pair of pencil microphone you will need - 2 sound modes, low-cut and pre-attenuation, lightweight, professional studio sound.
All included
A premium case for storing and transportation.
The BEATKIT PRO comes in a super-sturdy mil-spec transport case ideal for storing and transportation. All microphone mounts, windshields, and clamps are included, and the latter don’t need to be unmounted for storage, which is extremely convenient on tour. Never was there a more complete pro package.
DTP 640 REX
- Type: Dynamic, moving coil, Condenser, permanently polarized
- Acoustical Operating Principle: Pressure gradient transducer
- Transducer Ø: 31.7 mm, 1.25 in
- Transducer Ø: 22.4 mm, 0.88 in
- Polar Pattern: Cardioid
- Frequency Range (dynamic): 20 ... 16,000 Hz
- Frequency Range (condenser): 20 ... 20,000 Hz
- EFR, ‘Enhanced Frequency Response' Settings:
- Sensitivity, = // = FFR: 0.4 mV/Pa (-69 dBV), dynamic, 2 mV/Pa (-54 dBV), condenser
- Sensitivity, + // = Dynamic EFR: 0.4 mV/Pa, -69 dBV/Pa, dynamic, 2 mV/Pa, -54 dBV/Pa, condenser
- Sensitivity, + // + Dual EFR: Condenser and dynamic matched at 1 mV/Pa, -60 dBV
- Equivalent Noise Level: 28 dB (A)
- Max. SPL for 0.5 percent THD: 150 dBSPL, 0 dB pre-attenuation
- Dynamic Range of Mic. amp. (condenser): 122 dB (A)
- Pre-attenuation Pad: 0 dB, -10 dB, -20 dB
- Rated Impedance Dynamic: 500 Ohms
- Rated Impedance Condenser: 200 Ohms
- Supply Voltage: 48 V +/- 4 V
- Current Consumption: 2 mA
- Connector: Gold plated 3-pin and 5-pin XLR
- Cable: 1.5 m (4.95’) dual shielded Y-cable, 5-pin XLR into two 3-pin XLRs
- Microphone Dimensions: 71 dia. x 158 mm, 2.8 dia. x 6.2 in
- Microphone Net Weight: 755 g, 27.3 oz
MTP 440 DM
- Type: Dynamic, moving coil
- Acoustical operating principle: Pressure gradient transducer
- Polar pattern: Cardioid
- Sensitivity: 2.5 mV/Pa, -52 dBV/Pa
- Internal impedance: 500 ohms
- Connector: Gold plated 3-pin XLR
- Microphone enclosure: Zinc die cast
- Dimensions: 39 dia. x 159 mm, 1.53 dia. x 6.25 in
- Net Weight: 280 g, 9.88 oz
DTP 340 TT
- Type: Dynamic, moving coil
- Acoustical Operating Principle: Pressure gradient transducer
- Polar Pattern: Supercardioid
- Frequency Range: 40 ... 16,000 Hz
- Sensitivity: 1.4 mV/Pa, -57 dBV/Pa
- Internal Impedance: 500 Ohms
- Connector: Gold plated 3-pin XLR
- Microphone Dimensions: Ø 41 dia. X 94 mm, Ø 1.6 dia. X 3.7 in
- Microphone Net Weight: 165 g, 5.82 oz
LCT 140 AIR
- Type: Condenser, permanently polarised
- Acoustical operating principle: Pressure gradient transducer
- Transducer: 17 mm, 0.67 in
- Polar pattern: Cardioid
- Sensitivity: 14.6 mV/Pa, -36.7 dBV/Pa
- Equivalent noise level: 20 dB (A), cardioid
- Max. SPL for 0.5 percent THD: 135 dBSPL
- Dynamic range: 115 dB (A)
- Pre-attenuation pad: 0 dB, -12 dB
- Low-cut filter: linear 80 Hz (12 dB/oct)
- Internal impedance: 173 ohm
- Rated load impedance: 1000 ohm
- Supply voltage: 48 V ± 4 V
- Current consumption: 7.2 mA
- Connector: Gold plated 3-pin XLR
- Microphone dimensions: 24 dia. x 140 mm, 0.9 dia. x 5.5 in
- Microphone net weight: 66 g, 2.3 oz
