LCT 440 PURE 1" True Condenser Cardioid Microphone
High-end technology for pure studio sound.
You’ll fall in love with its larger-than-life sound and outstanding build quality right away. Its sound is specifically designed to let you perform comfortably while sounding sensational. That is possible because the LCT 440 PURE uses the same high-end components, capsule and circuit design as our prestige models.
- Best in class for vocals and instruments
- High-end capsule and circuit design
- Cardioid polar pattern
Included: Shock mount, Magnetic pop filter, Foam windscreen, Transport bag
Preserve the rainforest with the VIDA limited edition.
Lewitt teamed up with the Austrian NGO "Rainforest of the Austrians" by acquiring 30,000 m2 of rainforest in Costa Rica and placing it under protection. With every unit sold of the LCT 440 PURE - VIDA edition, part of the proceeds directly support this cause.
1" true condenser capsule - The best in its class.
There are these rare jewels that sound great on everything. The LCT 440 PURE is one of those, and its impressive specifications make it a studio allrounder that lives up to its name.
Record acoustic guitars, drums, wind instruments, guitar cabinets; you’ll sound better than ever with pure studio sound quality.
Applications
-
Vocal recordings
Keep a short distance relative to the microphone (approx. 15 cm), this way the room acoustics are not overly prominent and you receive a full sounding and dry vocal recording. -
Mic-up guitar amps
To record a guitar or bass amplifier with your LCT 440 PURE, place it close to the speaker of your combo or cabinet, directed slightly off-axis to the speaker. -
Recording acoustic guitar
An easy and very common way to record acoustic guitar using only one microphone is to place it 20-30 cm away from the instrument, pointing towards the area where the neck and body meet. -
Record drums
Use it to for snare, cymbals, overhead or to record room sound.
- Type
Condenser, externally polarized
- Acoustical operating principle
Pressure gradient transducer
- Diaphragm
3 micron gold sputtered Mylar
- Transducer Ø
25.4 mm, 1 in
- Polar pattern
Cardioid
- Frequency range
20 ... 20,000 Hz
- Sensitivity
27.4 mV/Pa, -31.2 dBV/Pa
- Self-noise
7 dB (A)
- Max. SPL for 0.5 % THD
140 dBSPL
- Signal / noise ratio
87 dB (A)
- Dynamic range
133 dB (A)
- Supply voltage
48 V ± 4 V
- Current consumption
2.63 mA
- Internal impedance
110 Ω
- Connector
Gold plated 3-pin XLR
- Microphone enclosure
Zinc die cast
- Microphone dimensions
138 x 52 x 36 mm, 5.43 x 2.04 x 1.42 in
- Microphone net weight
310 g, 10.9 oz
Microphones measured according to: IEC 60268-4 | Phantom power according to: IEC 61938 | Noise measurement according to: IEC 60268-1
