1. Home
  2. Equipment
  3. Moog Werkstat-01 Analogue Semi-Modular Synth with CV Expander Kit

Moog Werkstat-01 Analogue Semi-Modular Synth with CV Expander Kit

£199.00

Limited Edition Re-Run. Easy to assemble DIY kit from Moog Music: Werkstatt-01 is the perfect partner for computer-based musicians wanting a genuine Moog semi-modular synth to sample and layer

  • Very affordable Moog sound, worth it for the filter alone!
  • DIY kit, but actually very easy to build and fun!
  • Now comes with 3.5mm patch expander as standard for easier integration with modular etc.
  • Sounds great!!
Out of stock

Werkstatt-01 gives you an genuine Moog standalone analogue semi-modular monosynth, including full range oscillator, 24dB ladder filter, Envelope generator and audio-rate LFO, for less than the cost of many single-purpose Eurorack modules. Being semi-modular, it is able to act as a modular expander, or be a flexible standalone synth in its own right.

It features a simple push-button keyboard, plus CV and Gate Input for use as a voice module alongside CV/Gate enabled keyboards and sequencers, such as Arturia KeyStep, Beatstep and Beatstep Pro.

By itself, Werkstatt-01 is ideal for computer-based musicians looking for a genuine analogue Moog to sample and record - you can make bass, leads, drums and more with it - it's simple to use, sounds fantastic and best of all, is incredibly affordable!

OSCILLATOR SECTION

• Single VCO w/ frequency control (8Hz to 16KHz)

• Saw and square waveshapes w/ control for square pulse width

• Envelope or LFO selectable Mod Source that can be assigned to PWM or Pitch w/ Amount control

• Ability to PWM the square wave

FILTER SECTION

• Classic 4-Pole Moog Ladder Filter w/ Resonance control (20Hz-20KHz)

• Select between the Envelope generator and LFO as Mod Source.

• Polarity switch (+/-) and amount knob for control of filter cutoff modulation

LFO SECTION

• Selectable Square or Triangle waveshape w/ rate control (2Hz-600Hz)

VCA/AMP SECTION

• Select between the Envelope Generator or ON (Drone)

ENVELOPES SECTION

• Controls for Attack & Decay time w/ Sustain On/Off switch

KB SECTION

• One octave low-note priority legato keyboard w/ glide control

PATCHBAY

• VCA Input0V to +5V in VCA EG Mode, +/-2.5V in VCA ON Mode

• VCF Input-5V to +5

• VCO LINEAR FM Input +/-2.5V - NOTE: this is an inverting control input

• VCO EXPONENTIAL FM Input -5V to +5V, 1V/Octave trimmable

• LFO CV Input 5V to +5V – NOTE: Negative CV slows LFO more than the panel

• VCF AUDIO InputUnbuffered/Unmixed AC coupled input to VCF

• 2x KB CV Output3V/semitone from 1 keyboard - NOTE: Attenuate for 1V/Octave

• 2x TRIG Output 5 msec pulse, 0 to +5 V signal generated from low-note priority

• 2x GATE Output0 to +5V signal generated from low-note priority

• 2x EG Output0 to +5V signal, Simple ASD or AD type Envelope Generator

• 2x LFO Output -2.5 to +2.5V Triangle or Square wave, selected via LFO Switch

• 2x VCF Output-2V to +2 V signal for audio or CV uses

• 2x VCO Output0V to +5V VCO signal, wave selected by VCO Wave Switch

Rear Panel

• AUDIO Output Nominal +/-1.5V Signal

• POWER+12VDC Center Positive w/ 1.2A Wall transformer

• POWER CONSUMPTION 1.8 Watt AVG

, OSCILLATOR SECTION


• Single VCO w/ frequency control (8Hz to 16KHz)


• Saw and square waveshapes w/ control for square pulse width


• Envelope or LFO selectable Mod Source that can be assigned to PWM or Pitch w/ Amount control


• Ability to PWM the square wave


 


FILTER SECTION


• Classic 4-Pole Moog Ladder Filter w/ Resonance control (20Hz-20KHz)


• Select between the Envelope generator and LFO as Mod Source.


• Polarity switch (+/-) and amount  knob for control of filter cutoff modulation


 


LFO SECTION


• Selectable Square or Triangle waveshape w/ rate control (2Hz-600Hz)


 


VCA/AMP SECTION


• Select between the Envelope Generator or ON (Drone)


 


ENVELOPES SECTION


• Controls for Attack & Decay time w/ Sustain On/Off switch


 


KB SECTION


• One octave low-note priority legato keyboard w/ glide control


 


PATCHBAY


• VCA Input0V to +5V in VCA EG Mode, +/-2.5V in VCA ON Mode


• VCF Input-5V to +5


• VCO LINEAR FM Input +/-2.5V - NOTE: this is an inverting control input


• VCO EXPONENTIAL FM Input -5V to +5V, 1V/Octave trimmable


• LFO CV Input 5V to +5V – NOTE: Negative CV slows LFO more than the panel


• VCF AUDIO InputUnbuffered/Unmixed AC coupled input to VCF


• 2x KB CV Output3V/semitone from 1 keyboard - NOTE: Attenuate for 1V/Octave


• 2x TRIG Output 5 msec pulse, 0 to +5 V signal generated from low-note priority


• 2x GATE Output0 to +5V signal generated from low-note priority


• 2x EG Output0 to +5V signal, Simple ASD or AD type Envelope Generator


• 2x LFO Output -2.5 to +2.5V Triangle or Square wave, selected via LFO Switch


• 2x VCF Output-2V to +2 V signal for audio or CV uses


• 2x VCO Output0V to +5V VCO signal, wave selected by VCO Wave Switch


 


Rear Panel


• AUDIO Output Nominal +/-1.5V Signal


• POWER+12VDC Center Positive w/ 1.2A Wall transformer


• POWER CONSUMPTION 1.8 Watt AVG


 

More by Moog Music

You may also like...

Sunday,Monday,Tuesday,Wednesday,Thursday,Friday,Saturday
January,February,March,April,May,June,July,August,September,October,November,December
Not enough items available. Only [max] left.
Browse WishlistRemove Wishlist

Shopping cart

Your cart is empty.

Return To Shop

Estimate Shipping
Add A Coupon

Estimate Shipping

Add A Coupon

Coupon code will work on checkout page

Product:

Moog Werkstat-01 Analogue Semi-Modular Synth with CV Expander Kit

£199.00