At the heart of the NT2-A is the Australian designed and manufactured HF1 dual diaphragm capsule. The frequency and transient response of this transducer has been voiced to complement today's modern recording techniques - and yet still evoke the silky smooth character of the legendary microphones of the 50's and 60's. These features provide the flexibility and superlative audio characteristics that make the NT2-A one of the most versatile condenser mics available.
The NT2-A has variable controls that allow switching between Omni - Figure 8 - and Cardioid polar patterns. The three position high-pass filter provides a flat response or an 80Hz and 40Hz high pass filter to be selected. Finally the microphones Pad can be switched between 0 dB - -5dB and -10dB. The NT2-A comes in a soft pouch with an M2 stand mount.
Features:
- The Australian designed and manufactured HF1 1inch edge terminated - gold sputtered - dual 5 um diaphragm capsule.
- 3-position variable polar pattern: Omni - Cardioid and Figure 8; all controlled on the mic
- 3-position variable high-pass filter: Flat - 80 Hz or 40 Hz
- 3-position variable pad: 0 dB - -5 dB or -10 dB
- Ultra low noise - transformerless SMT circuitry
- Wide dynamic range
- High strength heat-treated steel mesh head
- Durable satin nickel finish
- Internal capsule shock mounting
- Supplied complete with soft pouch and clip
- Designed and manufactured in Sydney - Australia
Specifications:
- Acoustic principle: Externally polarized 25 mm (1 inch) dual diaphragm
- Directional pattern: Multi-pattern - 3 position variable pattern Omni - Cardioid and Figure 8 - controlled at the microphone
- Frequency range: 20 Hz - 20 000 Hz
- Output impedance: 200 Ohm
- Signal/Noise ratio DIN/IEC 651: 87 dB (1 kHz rel 1 Pa; per IEC651 - IEC268-15)
- Equivalent noise: 7 dBA SPL (per IEC651 - IEC268-15)
- Maximum SPL: 147 dB (@ 1% THD into 1 kOhm) 157 dB (@ 1% THD into 1 kOhm) - pad at maximum
- Sensitivity at 1 khz into 1 kOhm: -36 dB re 1 Volt/Pascal (16 mV @ 94 dB SPL) +/-2 dB
- Maximum output voltage: +16 dBu (@ 1% THD into 1 kOhm)
- Dynamic range - DIN/IEC 651 140 dB (per IEC651 - IEC268-15)
- Power (Supply voltage): 48 Volts (P48)
- Output Connection: 3 pin XLR - balanced output between pin 2(+) and pin 3(-); pin 1 ground
- Weight approx.: 860 grm (30.36 oz)
Specifications:
- Acoustic principle: Externally polarized 25 mm (1 inch) dual diaphragm
- Directional pattern: Multi-pattern - 3 position variable pattern Omni - Cardioid and Figure 8 - controlled at the microphone
- Frequency range: 20 Hz - 20 000 Hz
- Output impedance: 200 Ohm
- Signal/Noise ratio DIN/IEC 651: 87 dB (1 kHz rel 1 Pa; per IEC651 - IEC268-15)
- Equivalent noise: 7 dBA SPL (per IEC651 - IEC268-15)
- Maximum SPL: 147 dB (@ 1% THD into 1 kOhm) 157 dB (@ 1% THD into 1 kOhm) - pad at maximum
- Sensitivity at 1 khz into 1 kOhm: -36 dB re 1 Volt/Pascal (16 mV @ 94 dB SPL) +/-2 dB
- Maximum output voltage: +16 dBu (@ 1% THD into 1 kOhm)
- Dynamic range - DIN/IEC 651 140 dB (per IEC651 - IEC268-15)
- Power (Supply voltage): 48 Volts (P48)
- Output Connection: 3 pin XLR - balanced output between pin 2(+) and pin 3(-); pin 1 ground
- Weight approx.: 860 grm (30.36 oz)
