1. Home
  2. Equipment
  3. Velectronic A-envelope - Associative Quadruple Envelope

Velectronic A-envelope - Associative Quadruple Envelope

£407.50

A-envelope is a quad envelope that makes it possible to define polyphonic configurations on the go for up to 4 voices, in a simple way. Not only that, but it also acts as an extremely powerful modulation source.

  • Rubadub Recommends! *New Firmware in Specs*
  • Modulate every of the ADSR stages in time or shape (Exp, Lin, Log) independently
  • Configure the input activation mode as Gate, Trigger or Re-Trigger, and configure the channel in single, loop or auto-loop mode
  • Adjust the amount of modulation using the stage knobs when acting as attenuverters
  • Built like an absolute TANK - one of the most solid modules we've ever seen
Out of stock

A-envelope was created in its basis to help and simplify the patching in polyphonic configurations. As we all can imagine, bringing polyphony to modular is a pretty tough thing to do because a good bunch of reasons like, space, dedicated modules, a lot of boilerplate patching and more, and even if sometimes we would like to have an harmonic duet or a three or four notes chord, we end up looking for wacky "workarounds". Additionally, during the iterative ideation and creation process some other interesting ideas came up and we could not hold us back from adding them.

Of course and as usual, every one of us will imagine very different application depending on our own use-case.

A-envelope is basically a four channel ADSR envelope with the capability of associating these channels in groups. Each of the channels has also modulation capabilities up to audio rate frequencies for every of the parameters of the envelope. It also supplies configurable begin and end of stage outputs to easily chain events to create complex movements.

The A-envelope despite it is a highly configurable and complete element, its user interface is been made for performing. Has LED monitors for every move.

 

Power consumption

The power consumption it is been measured with all LEDs on.

The +5V jumper selected (Recommended)

  • +5v = 170 mA
  • +12v = 35 mA
  • -12v = 23 mA

The +12V jumper selected

  • +5v = 0 mA
  • +12v = 245 mA
  • -12v = 23 mA

Protection

  • Protection for human body model electrostatic discharge (ESD) of 2kV.
  • Power connector reverse protection.
  • Protection against power polarity inversion.

Working Temperature

  • Working ambient temperature from -20ºC to 70ºC.

Accuracy

  • The accuracy for all specified values is < 1%.

Dimensions

  • 22HP
  • 3U
  • 38mm depth from the back of the panel to the power connector, including the connector.
  • Firmware Download Link 
  • Update procedure
    The A-envelope is provided with a USB A port, for firmware update purposes.
    Follow the steps to perform the update.
    1. Download from the firmware list the one you want to apply.
    2. Copy the downloaded file to at the root of your USB storage device.
    3. Rename the copied file to a-envgen.hex.
    4. Power off the module.
    5. Keep pressed the Attack modulation button.
    6. Power on the module.
    7. Now the module is in boot mode.
    8. The trigger and sustain modulation buttons will get enabled and the channel buttons will blink waiting for a USB storage device.
    9. Plug the USB storage device in the module USB port.
    10. If everything is fine, the channel buttons will show the firmware update check progress.
      1. If the firmware is not being detected, the channel buttons will remain blinking and you will need to check the previous steps.
      2. If the firmware is not valid or is not suitable for this module, the release shape LED will start blinking.
    11. If the firmware update check succeeds, the channel button will turn off and the loop, trigger and sustain modulation buttons will get enabled.
    12. Push the loop button to proceed with the update.
    13. The channel buttons will show the firmware update progress.
    14. Once the update terminates, the module will restart.

 

More by Velectronic

You may also like...

Sunday,Monday,Tuesday,Wednesday,Thursday,Friday,Saturday
January,February,March,April,May,June,July,August,September,October,November,December
Not enough items available. Only [max] left.
Browse WishlistRemove Wishlist

Shopping cart

Your cart is empty.

Return To Shop

Estimate Shipping
Add A Coupon

Estimate Shipping

Add A Coupon

Coupon code will work on checkout page

Product:

Velectronic A-envelope - Associative Quadruple Envelope

£407.50