Condesa Carmen V Rotary Mixer w/ Flight Case + PSU (Urei Edition)

£3,389.00

The Carmen V has landed with Rubadub; an exclusive drop from Condesa Electronics with black pointer Urei knobs.

  • Black Pointer Urei Knobs
  • 3 way ISO
  • Cased in Australian Blackwood
  • FX send/return per channel
  • Linear power supply with mains selection switch
Out of stock
Availability: In Stock | Free UK Shipping

Condesa Electronics has been building highly sought after rotary mixers since 2012. The Adelaide based company has dropped a multitude of equalisers and mixers that have been held to a high acclaim by some of the music community's most respected figures. Arguably the company's flagship model, the Carmen V boasts all the qualities and more of a hi-fi analog 4 channel rotary.

The Carmen V brings the Carmen EQ/ISO and Lucia models together with a stronger 3 way EQ per channel, FX send/return per channel, 3 switchable phono/line inputs as well as a discrete custom 3 pole isolator as standard. This model has the inclusion of the black pointer Urei knobs. 

Ergonomics:

The Carmen V is housed in dark Australian Blackwood, measuring at 34cm x 26m x 8cm and weighing in at a sturdy 5kg. The size design makes it easily suitable to most booth and table set ups. This Carmen V console has eight potentiometers for channel volume and isolators as well as 3 way EQ isolator.

Each channel has three small potentiometers for three-band EQ control whilst still maintaining a generous amount of space between handles across the console. The high and low EQs boost and cut at 120 Hz and 12 kHz by +/- 12 dB each. The mids boost and cut at 16dB. All controls on the mixer, apart from the cue selector switch, are high quality ALPS potentiometers that form a slick aesthetic and a logically structured work surface that most rotary enthusiasts should appreciate.

The three large rotary volume pots are the only volume controls. There is no additional gain level for the channels. Condesa relies on the unwritten purity law of noble rotary mixers to keep the signal as pure as possible and thereby avoid unnecessary distortion.

This model now includes the highly sought after FX send/return panels with a dedicated potentiometer for each of the four channels. This is also accompanied by a global returns level potentiometer.   

The phono inputs raise the turntable signal with 42 dB to RCAA level, the line inputs go directly to the channel equaliser without further amplification. If the EQs are set to flat, the signal remains unaffected by further amplification and is only raised to unity gain with the volume potentiometer (at about 2 o'clock position) or is boosted up to 10 dB at full stop - this is highly useful for quietly pressed vinyl.

Controls:

The headphone switches offers 4 channel cueing options, a cue sum master signal cross fader and a volume control for the headphone output. The headphone jack itself is located on the front and is a high-quality socket that should survive thousands of plugging operations without damage. With six small mini toggle switches made of metal, the DJ can choose between a phono and a line input for channels 2 to 4, only channel 1 is reserved for use with line sources in the basic configuration. The switch in between the VU meters is the isolator bypass.

Connections:

Carmen's back is crammed with connections: 22 cinch sockets, two jack and two XLR outputs as well as the socket for the 48-volt power supply and a small metal toggle switch for power are all squeezed into almost 200 square centimetres. No space was wasted here and everything that a DJ would require has been considered.

As already mentioned, channel 1 is a pure line channel, but for channels 2 to 4 there are cinch inputs for phono and line operation.

Another small, fine detail are the two earthing screws, which are equipped with long hexagonal shafts, so that the earthing cable of the record player can be clamped between the cable plugs without the otherwise often necessary fiddling.

Flight Case:

Included in this listing comes a reinforced travel case custom built for the Carmen V. This will safely house the mixer for all types of transit or for just general storage.

Model:

Carmen V FX (Urei Edition)

Faceplate:

Black anodised aluminium


Wood

Dark (Australian Blackwood)

Flight Case:


Included w/ mixer

Inputs:

Channel 1 - fixed stereo line RCA

Channels 2, 3 & 4 - selectable stereo RCA phono (A) / line (B)

Outputs:

Stereo master (unbalanced RCA and transformer balanced XLR outputs)

Stereo booth (transformer balanced TRS)

Stereo record (RCA unbalanced, fixed level)

EQ:

3 Way ISO 

Isolator:

Discrete circuit

4 pole ISO - 24dB cut per octave

3 way master isolator – boost 12db, cut to infinity

10Hz - 80Hz (sub), 80Hz - 280Hz (low), 280Hz - 4kHz (mids), 4 - 22kHz (high)

True bypass switch

FX panel:


FX send/return per channel, loop becomes a send/return path
Cueing system:

Direct stereo cueing of any channel

Cue to master blend

Metering:

Stereo VU meters, master output, post volume (0vu = 0dbm)

Power:

External 48v DC power supply 100v-240v AC input

Linear power supply with mains selection switch, 110-240v

Dimensions:

34cm x 26m x 8cm


Weight:


5kg


Warranty:
2 years

Customer Reviews

Based on 1 review Write a review

 
Sunday,Monday,Tuesday,Wednesday,Thursday,Friday,Saturday
January,February,March,April,May,June,July,August,September,October,November,December
Not enough items available. Only [max] left.
Browse WishlistRemove Wishlist

Shopping cart

Your cart is empty.

Return To Shop

Estimate Shipping
Add A Coupon

Estimate Shipping

Add A Coupon

Coupon code will work on checkout page

Product:

Condesa Carmen V Rotary Mixer w/ Flight Case + PSU (Urei Edition)

£3,389.00