Features:
- Two 104 hp rows (6U) of Eurorack module space.
- One 104 hp row for our 1U modules.
- Threaded M3 strips for mounting modules.
- High spec TPS80W power supply capable of powering up to 28 modules with +12 V output at 3000 mA, -12 V output at 3000 mA and +5 V output at 1500 mA
Construction:
- Solid plastic carrying handle.
- Detachable nylon carrying strap.
- Anodized aluminum lid with latches, deep enough to close the case with cables patched in.
- Retractable feet that can support the case at two different angles. Or lay the case flat on a table.
- Plastic feet for resting the case on the table.
- Rubber feet on bottom side of lid so the case can stand vertically with the lid attached.
- Spring-loaded latching accessory slots on top and bottom of the case. The slots can be used to attach two cases together and for the carrying strap.
Rear panel:
- Four 1/4″ audio jacks that can be connected to the Audio I/O 1U. Two ins and two outs.
- MIDI In, Out, and Thru jacks. The In jack can be connected to the µMIDI 1U and will pass to the Thru. The Out is for future expansion.
- USB port that connects to the µMIDI 1U and other future modules.
- Rocker switch and barrel plug for power entry.
Max. internal depth for modules: 70 mm
Internal depth for modules above the highest point of the power bus board: 53 mm
Outside dimensions with lid: 312 mm x 165 mm x 546 mm
Outside dimensions without lid: 312 mm x 83 mm x 546 mm
Weight: 2.7 kg with lid, 3.0 kg with lid and power adapter*
Power: TPS80WMAX +12 V output at 3000 mA, -12 V output at 3000 mA, +5 V output at 1500 mA
